Fluid resistant heat shrinkable polyolefin identification tubing
- BrandDEEM
- TypeD-marking135F
Special designed to meet the requirements of high performance identification of wire and
cables where exposure to organic fluids, especially oils, is required. It is made of superior
fluid resistant flame retardant polyolefin with excellent electrical, physical, chemical and
printing properties. It can be easily printed by marker printers with permanent identification
widely used in aerospace, military, railway, construction industry, etc.
Features
Shrink ratio 3:1
Fluids resistant.
Meet the requirements of aerospace and railway use.
Excellent printing property, permanent identification to meet SAE AS81531.
Excellent electrical, physical, chemical and printing properties.
RoHS and REACH compliant.
Operating temperature range:
Operating temperature: -55°C~ 135°C
Minimum shrink temperature: 80°C
Minimum fully recovery temperature: 120°C
Approvals:
SAE AMS-DTL-23053/5
UL224 125°C 600V
SAE AS 81531, MIL-STD-202
| Property | Requirement | Test method | Typical Data |
| Longitudinal shrinkage | ≤10% | ASTM D 2671 | ≤5% |
| Tensile strength | 10.4 MPa min. | ASTM D 638 | ≥13MPa |
| Elongation at break | 200% min. | ASTM D 638 | 2400% |
| Elongation after ageing(175°C,168hrs) | 100% min. | Min.1014 Ω·cm | ≥300% |
| Heat shock | No crack | ASTM D 2671 | No crack |
| Low-temperature flexibility(-55°C,4hrs) | No crack | ASTM D 2671 | No crack |
| Dielectric voltage withstand | 2500V,60sec, no breakdown | ASTM D 2671 | No breakdown |
| Dielectric strength | 19.7 KV/mm min. | ASTM D 2671 | ≥25 KV/mm |
| Volume resistivity | 1014Ω ·cm min | ASTM D 876 | ≥1014Ω·cm |
| Corrosion | No corrosion | ASTM D 2671 | No corrosion |
| Flammability | Self-extinguishing within 1 minute | AMS-DTL-23053 | pass |
| Printing performance | 50 rubs, legible 30 strokes, legible |
SAE AS81531
MIL-STD-202
|
pass |
| Fluid resistance (23℃,24hrs) | Printing legible | SAE AS81531 | pass |
Notes:
Size
Size After Recovery(mm)
Inch
mm
3/32
Φ2.4
2.4
0.8
0.9-2.0
250
100
1/8
Φ3.2
3.2
1.1
1.1-2.7
250
100
3/16
Φ4.8
4.8
1.6
1.8-4.1
250
100
1/4
Φ6.4
6.4
2.1
2.3-5.5
250
100
3/8
Φ9.5
9.5
3.2
3.5-8.1
250
100
1/2
Φ12.7
12.7
4.2
4.6-10.8
250
100
3/4
Φ19.1
19.1
6.3
7.0-16.3
250
100
1
Φ25.4
25.4
8.5
9.3-21.6
250
100
11/2
Φ38.1
38.1
19.1
21.0-37.0
250
100
2
Φ50.8
50.8
25.4
27.0-48.0
250
100
Standard color: White or yellow
