Flat aluminum & fiberglass sleeve
2024/8/1 viewers
- BrandDEEM
- TypeDF-A
Introduction
ApplicationsIt is suitable for the protection of cable assemblies ,hoses and pipes from a heat source.
Used within the automotive sector.
Features
DF-A is Flexible sleeve made of fiberglass braid covered with an aluminum foil.
DF-A offers a continuous working temperature of - 40°C up to +200°C.lts smooth and reflective outer surface provides a very effective barrier to radiant heat. It is a fully tubular sleeve designed to eliminate conventional "sewn” alternatives.
Various
Standard color: Reflective aluminum.
Exists also with polyester instead of fiberglass(- 40°C to 150°C)
Technical Data
| Property | Test Method | Values | |
| Physical | Working temperature | -40℃+200℃ | |
| Thermal endurance - Radiation 6h @ 550℃ | 25mm above radiant heat source | No delamination | |
| Thermal endurance-Aging 1000h @ 200°℃ | Oven aging | No delamination | |
| Low temperature flexibility 4h @-40℃ | No delamination | ||
| Flammability | FMVSS 302 | Self extinguishing | |
| D451333 | Type B | ||
| Chemical | Fluid resistance | D471924 | No delamination |
| As Supplied (mm) | Recommended range of use(mm) |
| 6.4 | 4-6 |
| 9.5 | 7-9 |
| 12.7 | 10-12 |
| 15.8 | 13-15 |
| 19.1 | 16-19 |
| 22.2 | 20-22 |
| 25.4 | 23-25 |
| 31.8 | 26-31 |
| 38.1 | 32-38 |
| 50.8 | 40-50 |
| 76.2 | 66-76 |
| 101.6 | 92-101 |
*special spool lengths or cut pieces available on request.
More Products
