Yellow&Green High Quality Polyolefin Tubing
- BrandDEEM
- TypeDM-YG125
Applications
Used to identify electrical grounding as well as protecting and insulating wires harnesses
of light cabling. Easy to mark for additional identification.
Features
Resistant to common fluids and solvents. Flexible and
flame retardant. Free from harmful substances as PBB's,
PBBO's, PBBE's and toxic.
Various
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 70°C
Minimum fully recovery temperature: 120°C
Standard color: Yellow & Green
shrink ratio: 2:1 3:1
Technical Data
| Property | Test Method | Typical Data |
| Operating temperature | UL224 | -55°C to+125℃ |
| Tensile strength | ASTM D 2671 | >14 MPa |
| Elongation at break | ASTM D 2671 | 400% |
| Longitudinal shrinkage | UL224 | 0±5% |
| Eccentricity | ASTM D 2671 | <30% |
| Flammability | VW-1 | Pass |
| Dielectric strength | ASTM D 150 | 20 KV/mm |
| Volume resistance | ASTM D 876 | 1014Ω.cm |
| Copper corrossion | UL224 | Pass |
| Heat aging / Tensile strength / Ultimate elongation | 158C/168h | Unaged/>12 MPa/>350% |
| Heat shock (250°C/4hrs.) | ASTM D 2671 | No Cracking |
| Cold bend test(-55°C/4hrs.) | ASTM D 2671 | No Cracking |
| Water absorption | ASTM D 570 | 0.15% |
Dimensions/2X
| Size |
As Supplied (mm) |
After Recovery (mm) |
Standard length m/spool |
|
|
Inch (D) |
Inside Diamete Min. (D) |
Inside Diamete Max. (d) |
Wall Thickness Nominal.(t) |
|
| 3/64 | 1.2 | 0.6 | 0.30 | 200 |
| 1/16 | 1.6 | 0.8 | 0.33 | 200 |
| 3/32 | 2.4 | 1.2 | 0.36 | 200 |
| 1/8 | 3.2 | 1.6 | 0.44 | 200 |
| 3/16 | 4.8 | 2.4 | 0.55 | 200 |
| 1/4 | 6.4 | 3.2 | 0.55 | 100 |
| 3/8 | 9.5 | 4.8 | 0.55 | 100 |
| 1/2 | 12.7 | 6.4 | 0.65 | 100 |
| 5/8 | 16 | 8 | 0.69 | 100 |
| 3/4 | 19.1 | 9.5 | 0.89 | 100 |
| 1 | 25.4 | 12.7 | 0.90 | 50 |
| 11/4 | 32 | 16 | 0.90 | 50 |
| 11/2 | 38.1 | 19.1 | 1.00 | 50 |
| 2 | 50.8 | 25.4 | 1.00 | 25 |
| 3 | 76.2 | 38.1 | 1.20 | 25 |
| 4 | 100 | 50.8 | 1.60 | 25 |
| 5 | 120 | 63 | 2.00 | 25 |
| 6 | 150 | 75 | 2.00 | 25 |
| 7 | 180 | 90 | 2.10 | 25 |
Dimensions/3X
| Size |
As Supplied
(mm)
|
After Recovery (mm) |
Standard length m/spool |
|
|
Inch (D) |
Inside Diameter Min. (D) |
Inside Diameter Max. (d |
Wall Thicknes Nominal. (t) |
|
| 1/8 | 3.2 | 1.0 | 0.50 | 200 |
| 3/16 | 4.8 | 1.5 | 0.55 | 100 |
| 1/4 | 6.4 | 2.0 | 0.55 | 100 |
| 3/8 | 9.5 | 3.0 | 0.60 | 50 |
| 1/2 | 12.7 | 4.0 | 0.65 | 50 |
| 3/4 | 19.1 | 6.0 | 0.85 | 50 |
| 1 | 25.4 | 8.0 | 1.00 | 50 |
| 11/2 | 39 | 13 | 1.20 | 50 |
*Spools as standards. 1 m. or 1,22 m. sticks, special spool lengths or cut pieces available on request.
Special sizes (up to 7 inches) and other special features available on request
