Heat shrink semi rigid mini polyolefin caps
2024/7/29 viewers197
- BrandDEEM
- TypeDM-M
Introduction
ApplicationsSpecially designed to provide mechanical and environment of stub splice in electrical harness. Clear caps allow see-through inspection. Black caps are flame retardant.
Features
Mechanically tough jacket provides strain relief and abrasion protection. Thick adhesive liner forms an effective barrier against fluids and moisture and performs well at an extended temperatures range.
Various
Operating temperature: - 55°C to +135°C
Minimum shrink temperature: 100°C
Standard color: Black, Clear.
Shrink Ratio: 4:1
Technical Data
| Property | Test Method | Typical Data |
| Tensile strength | ASTM D 638 | >14 MPa |
| Elongation at break | ASTM D 638 | >400% |
| Density | ASTM D 792 | 1.05 |
| Elongation at break after aging(150°C/168 hrs.) | ASTM D 2671 | 300%(min) |
| Dielectric strength | IEC243 | >15KV/mm |
| Volume resistance | IEC93 | ≥1014Ω.cm |
| Size | As Supplied (mm) | After Recovery (mm) | |
| mm. (L) |
Inside Diameter
Min. (D)
|
Inside
Diameter Max. (d)
|
Total Wall
Thickness Nor. (t)
|
| 30.1 | 5.72 | 1.27 | 1.30 |
| 45 | 5.72 | 1.27 | 1.30 |
| 30.1 | 7.44 | 1.65 | 1.50 |
| 45 | 7.44 | 1.65 | 1.50 |
| 30.1 | 10.85 | 2.41 | 2.0 |
| 45 | 10.85 | 2.41 | 2.0 |
More Products
